By means of electricity; as, electrically controlled lights.

A fluid in which the properties are altered by either an electric field (electrorheological fluid) or a magnetic field (ferrofluid).

1. A read-only memory in which selected locations can be reprogrammed for a limited number of times by the application of an electric field; used on IBM computers.
2. A read-only memory which can be reprogrammed electrically in the electric field for a limited number of times, after the entire memory is erased by applying an appropriate electric field.
3. A kind of non-volatile memory used in computers and other electronic devices in order to store small amounts of data that must be saved when the electric power is removed; for example, calibration tables or device configurations.

1. Joined through an electrical conducting path; such as, a resistor, an inductor, a capacitor, or a wire.
2. Electricity which is connected by means of a conducting path, or through a capacitor that is distinguished from a connection simply through electromagnetic induction.

1. A method of storing data on microchips.

Usually bytes can be erased and reprogrammed individually.

RFID tags that use EEPROM are more expensive than factory programmed tags, where the number is written into the silicon when the chip is made, but they offer more flexibility because the end user can write an ID number to the tag at the time the tag is going to be used.

2. A form of read-only memory which can be electrically erased and reprogrammed.
3. An integrated-circuit memory chip that has an internal switch to permit a user to erase the contents of the chip and to write new contents into it with electrical signals.

A form of read-only memory in which the entire contents can be erased electrically and reprogrammed hundreds of time without damaging the device.

A bone regeneration process in which surgically implanted electrodes convey electric current, particularly at nonunion fracture sites; effective because of the different electrical potentials within bone tissue.

The process is effective because of the different electric potentials within bone tissue. Viable non-stressed bone is electronegative in the metaphysical regions and over a fracture callus and electropositive in the diaphyses and other less active regions.

Electric stimulation of the fractures can accelerate osteogenesis, forming bone more quickly in the area of a surgically inserted negative electrode.

Electrically stimulated osteogenesis can be achieved with a device that stimulates the fracture site electrically by means of several surgically implanted cathodes.

Another method for applying electrical current to fractured bone involves an open surgical procedure and implantation of electrodes.

1. A gyroscope characterized by a central rotating element which is maintained in place by an electromagnetic or electrostatic field.
2. A gyroscope in which the main rotating element is suspended by an electromagnetic or an electrostatic field.

An oscillator whose frequency is determined by the value of a voltage, current, or power.

An oscillaory is a mechanical or electronic device that produces a back-and-forth periodic motion.

A pendulum is a simple mechanical oscillator that swings with a constant amplitude, requiring the addition of energy at each swing only to compensate for the energy lost because of air resistance or friction.

In electronic oscillators, electrons oscillate with a constant period and also require the addition of energy to replace energy loss.

Electronic oscillators are used to generate alternating current and high-frequency currents for carrier waves in radio broadcasting.

An iron-core coil whose inductance can be varied or modified over a wide range by changing a small DC control current.