You searched for: “read
read
1. The process of retrieving data stored on an RFID tag by sending radio waves to the tag and converting the waves the tag sends back into data.
2. The extraction, decoding, and presentation of data from a tag.
This entry is located in the following unit: Radio Frequency Identification (RFID): Definitions (page 8)
read, read, reed, reed
read (REED) (noun)
Something written or printed that has been studied, examined and enjoyed: Laurel's latest novel is a good read.
read (REED) (verb)
1. To peruse or to look over something carefully: Ralph will read the author’s notes after he completes reading the book.
2. To follow a course of study at an educational institution or independently: Helene fully intends to read the classics when she goes to school next semester.
reed (REED) (verb)
To make corrugations, such as on the edge of a coin: Nicholas was a famous engineer who developed the machine to reed, or to make grooves on the coins for the mint.
reed (REED) (noun)
1. Any of a number of tall grasses that often grow in wet areas and frequently have jointed stems: Mrs. Smart said to her class, "This is an example of a reed from the marsh and, as a group, they provide a sanctuary for many birds."
2. A wind instrument made of a hollowed piece of wood: Fern brought her new reed with her when she started her new position with the chamber group.
3. Part of the equipment needed when setting up a loom which is used to space the warp threads evenly: Elva's husband made the reed which she used when she was setting up her loom in anticipation of weaving a blanket.

Those who don't read have no advantage over those who can't.

—E. C. McKenzie

The ancient Egyptian book Brandon read was written on papyrus which was made from a reed that grew near the river and one of the illustrations in the book showed a godlike figure playing on a reed instrument.

read, red
read (RED) (verb)
1. To have examined and grasped the meaning of written or printed characters, words, or sentences: Aurora read the newspaper earlier in the morning before she went to work.
2. To have gained information through the perusal of information available in printed, written, or computer form: Frank read the entire list of words shown on the computer and realized that he didn't know all of the definitions.
3. To have reviewed something looking for potential errors: Timothy read the printer's proofs of his new book and was very pleased.
4. To have ordered or reprimanded severely: Greg's mother read the riot act to him because he refused to go to bed when she told him to do it earlier.
red (RED) (noun)
1. A color that is part of a visible spectrum and resembles blood or a ruby stone: The red of the candy looked colorful in the lovely glass dish.
2. A term used to describe an economic or financial loss: The company was in the red last year and the possibility of a turnabout in the near future is minimal.

Madison read a large book with a red cover. It was an account of how the theater company wound up in the red because the management had not read the interests of the patrons correctly.

More possibly related word entries
A unit related to: “read
(Latin: read, readable [to choose words; to gather, to collect; to pick out; to read, to recite])
(bound to sell and to be read; the ability to hear with the eyes)
Word Entries containing the term: “read
compact disc read-only memory (s) (noun)
1. A compact disk that is used with a computer (rather than with an audio system).
2. A large amount of digital information that can be stored and accessed, but it cannot be altered by the user.
3. An optical disk that is physically the same as an audio CD, but contains computer data.

"Storage capacity is about 680 megabytes. CD-ROMs are interchangeable between different types of computers."

This entry is located in the following units: disco-, disc-, disko-, disk- + (page 1) memor-, memen- (page 1)
electrically alterable read-only memory (s), EAROM (noun)
1. A read-only memory in which selected locations can be reprogrammed for a limited number of times by the application of an electric field; used on IBM computers.
2. A read-only memory which can be reprogrammed electrically in the electric field for a limited number of times, after the entire memory is erased by applying an appropriate electric field.
3. A kind of non-volatile memory used in computers and other electronic devices in order to store small amounts of data that must be saved when the electric power is removed; for example, calibration tables or device configurations.
This entry is located in the following units: electro-, electr-, electri- (page 21) memor-, memen- (page 1)
electrically erasable programmable read-only memory, EEPROM
1. A method of storing data on microchips.

Usually bytes can be erased and reprogrammed individually.

RFID tags that use EEPROM are more expensive than factory programmed tags, where the number is written into the silicon when the chip is made, but they offer more flexibility because the end user can write an ID number to the tag at the time the tag is going to be used.

2. A form of read-only memory which can be electrically erased and reprogrammed.
3. An integrated-circuit memory chip that has an internal switch to permit a user to erase the contents of the chip and to write new contents into it with electrical signals.
electrically erasable read-only memory, EEROM
A form of read-only memory in which the entire contents can be erased electrically and reprogrammed hundreds of time without damaging the device.
This entry is located in the following units: electro-, electr-, electri- (page 21) memor-, memen- (page 1)
phantom read
Also called a phantom transaction or false read.

This takes place when a reader reports the presence of a tag that doesn't exist.

This entry is located in the following unit: Radio Frequency Identification (RFID): Definitions (page 7)
read range
1. The distance from which a reader can communicate with a tag.

Active tags have a longer read range than passive tags because they use a battery to transmit signals to the reader.

With passive tags, the read range is influenced by frequency, reader output power, antenna design, and method of powering up the tag. Low frequency tags use inductive coupling, which requires the tag to be within a few feet of the reader.

2. The maximum rate at which data can be read from a tag expressed in bits per second.
This entry is located in the following unit: Radio Frequency Identification (RFID): Definitions (page 8)
read rate
1. Often used to describe the number of tags that can be read within a given period.

The read rate can also mean the maximum rate at which data can be read from a tag expressed in bits or bytes per second.

2. The maximum rate at which data can be read from a tag.
This entry is located in the following unit: Radio Frequency Identification (RFID): Definitions (page 8)
read-only tags
1. Tags that contain data that cannot be changed unless the microchip is reprogrammed electronically.
2. Tags that can only be read because they were programmed at the factory.
This entry is located in the following unit: Radio Frequency Identification (RFID): Definitions (page 8)
read-write tag
1. An RFID tag that can store new information on its microchip.

These tags are often used on reusable containers and other assets.

When the contents of the container are changed, new information is written to the tag. Read-write tags are more expensive than read-only tags.

2. A tag that is reprogrammable.

Information can be added or changed.

This entry is located in the following unit: Radio Frequency Identification (RFID): Definitions (page 8)
write-once and read-many tag, WORM
A tag that can be part or totally programmed once by the user and afterward only read others.
This entry is located in the following unit: Radio Frequency Identification (RFID): Definitions (page 10)